IPE BEAMS

IPE Beams from hardwood

The hardwood beam is the stable basis for each construction. E.g. for building a deck, a partial roof or a jetty.

Mounting Ipe beams

Pre-drilling with a countersink is necessary for these beams. You screw the screw through the hardwood beam. The head of the screw is at the surface of the beam. Note, there is only 1 type of screw suitable for this wood. We deliver the correct type of screws that have enough strength to keep the hardwood beams properly in place.

The right screws for the job

We recommend to use our strong and special hardwood screws. You can either choose a metallic or black-coated screw. A dark black screw is less visible which gives a nicer end result.

Our screws are tested to make sure they are strong enough to keep the hardwood properly in place. Certainly not every type of screw is strong enough to resist these strengths. This is why we recommend to buy our screws, with full GUARANTEE of success. Our screws won't rust or oxidise.

• Screws: available in plain colour 5x5 or in 5x4                 
• Screws: available in powder-coated black in 5x5 or in 5x4

Hardwood foundation

A good foundation is built with these hardwood beams. If you use these beams as a joist under a deck, we recommend to limit the distance between the joists to 40 cm. We advise to use 3 hardwood foundation posts per square metre of the deck. You can make everything with these hardwood beams.

Need help to calculate a deck or the amount of beams?

Our hardwood calculator calculates easily and quickly
The amounts and lengths of the joists, foundation posts and screws.
Needed to achieve your project.

The professional user

Are you a horticulturist, contractor or do you have a carpentry business? Register your company now as a business customer, because you can get up to 10% off on the entire selection. We have the largest stock of hardwood in the Benelux.

Business registration - click here